Förstärkare med analog utsignal
Signal Conditioning Amplifiers
When signals are produced by dynamically applied loads, the instrumentation requires adequate frequency response, and a wide amplifier gain range.
Kontakta oss för mer info och offert på hyra/köp: info@lisab.se
|
| Signal Conditioning Amplifiers with PC control |  | Tillverkare: Vishay
Dimension (b*h*d):
Vikt:
Mätnoggrannhet:
Hämta PDF: 
Förfrågan: 
| | Description
The A2 is an analog signal conditioner and amplifier system for strain gages, strain-gage-based transducers, thermocouples and various other sensors with high-level signals. Scalable in multiples of eight channels to a maximum of 128 for each system, the A2 features digital control of the system instrumentation and monitoring of the analog outputs, both locally on the control panel and remotely by Ethernet from a PC.
* Features Strain gage, transducer, and thermocouple inputs.
* Frequency response to 110 kHz.
* Analog output of ±10 VDC.
* Operation with 12 to 15 Vdc and 120/240 Vac power.
* Scalable from 8 to 128 channels in high-density enclosures.
* Digital control from both front panel and PC over Ethernet.
* Remote channel-by-channel monitoring of signals by Ethernet.
|
| | 2200 förstärkare med analog utsignal |  | Tillverkare: Vishay
Dimension (b*h*d):
Vikt:
Mätnoggrannhet:
Hämta PDF:
Förfrågan:
| | 2200 förstärkare med analog utsignal:
Description
The 2200 System incorporates all the features necessary for precise conditioning of strain gage and transducer inputs in the most severe operating environments. Standard features include switch-selectable constant voltage/constant current excitation; + 350V common-mode capability; automatic electronic bridge balance; wide frequency response; switch selectable 4-pole Bessel low-pass filter. |
| | 2300 Signal Conditioning Amplifiers |  | Tillverkare: Vishay
Dimension (b*h*d):
Vikt:
Mätnoggrannhet:
Hämta PDF:
Förfrågan:
| | 2300 Signal Conditioning Amplifiers:
Description
The 2300 is a sophisticated multi-channel signal-conditioning amplifier for exacting instrumentation tasks. Advanced features include an individual regulated power supply for each channel, active filtering selectable by push-button control, three simultaneous outputs per channel, playback operating mode, wide frequency response, and automatic electronic bridge balance. |
| |
|
|
